Schedule Appointment Now

 

 

Are you searching for info on What Would Cause My Electric Water Heater to Stop Working??

Numerous modern-day homes make use of an electrical water heater for their heating system, as a result of its benefit and convenience of use. However, similar to any other electrical appliances, troubles may emerge with its usage, all of a sudden. It can be actually aggravating to awaken to a cold shower as opposed to a warm one or having your bath with water that isn't hot enough and even too warm. Whatever the situation might be, water heater issues can be rather aggravating. Luckily, we've made a checklist of possible options to your water heater concerns. There are a number of factors that might cause many of these issues, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety and security. Whatever the issue is, getting it fixed must not pose way too much of an issue if you adhere to these steps:

 

Check Your Power Supply:

As fundamental as this may appear, it is very needed. Without adequate power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, just turn it on and off again. Replace any kind of damaged or damaged fuse. Test the home appliance with power after these changes to see if it's now functioning.

 

Inspect the Heating Element in the Hot Water Heater:

If it's not a power problem, then attempt looking into your heating element if it is still working. Check each of your burner to ensure the issue isn't with any one of them. If any of them is damaged, replace that component and afterwards examine whether the hot water is back on.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might require to examine the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This must help warm the water. Turn the circuit breaker back on as well as examine if the trouble has been fixed.

 

Call An Expert:

If after changing all faulty parts as well as resetting your temperature level, the hot water heater still isn't working, you may need to call a professional plumber for an expert point of view. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water required in your house. Whatever the instance might be, an expert plumber would certainly assist address the trouble.

 

Conclusion

Water heater troubles are not constantly major. A number of them are because of small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nonetheless, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We had been made aware of that editorial about How to Troubleshoot and Repair an Electric Water Heater from an associate on our other web address. Do you know somebody who is fascinated about the subject? Take a moment to share it. Bless you for your time. Visit us again soon.

Click Here!